ABB ACS560 - Page 115

DefaultUnitRange/ListNameIndex
NameBitNameBitNameBit
Reserved9Reserved3...6PID active0
Deadband
active
10...11Output limit
high
7Reserved1
Internal set-
point active
12Output limit
low
8Output
frozen
2
Reserved13...15
Off[0]-See parameter 40.07
Process PID operation
mode.
PID operation mode71.07
Not selected[0]-See parameter 40.08
Set 1 feedback 1
source.
Feedback 1 source71.08
0.000s0.000...30.000Feedback filter time71.11
1500.00--200000.00…200000.00Setpoint scaling71.14
1500.00--200000.00…200000.00Output scaling71.15
Not selected[0]-See parameter 40.16
Set 1 setpoint 1 source.
Setpoint 1 source71.16
Not selected[0]-See parameter 40.19
Set 1 internal setpoint
sel1.
Internal setpoint sel171.19
Not selected[0]-See parameter 40.20
Set 1 internal setpoint
sel2.
Internal setpoint sel271.20
0.00%-200000.00…200000.00Internal setpoint 171.21
0.00%-200000.00…200000.00Internal setpoint 271.22
0.00%-200000.00…200000.00Internal setpoint 371.23
0.00%-200000.00...
200000.00
Setpoint min71.26
200000.00%-200000.00...
200000.00
Setpoint max71.27
Not inverted (Ref
- Fbk)[0]
-See parameter 40.31
Set 1 deviation inver-
sion.
Deviation inversion71.31
1.00-0.01...100.00Gain71.32
Parameter listing 115
EN
HI