ABB ACS560 - PID macro

DefaultUnitRange/ListNameIndex
60.0s0.0...999.0Integration time71.33
0.000s0.000...10.000Derivation time71.34
0.0s0.0...10.0Derivation filter time71.35
-200000.00%-200000.00...
200000.00
Output min71.36
200000.00%-200000.00...
200000.00
Output max71.37
Not selected[0]-See parameter 40.38
Set 1 output freeze.
Output freeze enable71.38
0.0%0.0…200000.0Deadband range71.39
0.0s0.0…3600.0Deadband delay71.40
No[0]-No[0], Limiting[1], Pro-
cess PID min lim[2],
Process PID max lim[3],
Other...
Increase prevention71.58
No[0]-No[0], Limiting[1], Pro-
cess PID min lim[2],
Process PID max lim[3],
Other...
Decrease prevention71.59
0.00%-200000.00…
200000.00
Internal setpoint actual71.62
%[1]Depends
on selec-
tion
0...31External PID units71.79
gal/m[28]ft3/m[21]I/min[14]inH2O[7]User text[0]
in wg[29]ft3/h[22]I/h[15]°C[8]%[1]
MPa[30]ppm[23]m3/s[16]°F[9]bar[2]
ftWC[31]inHg[24]m3/m[17]mbar[10]kPa[3]
kCFM[25]km3/h[18]m3/h[11]Pa[4]
inWC[26]gal/s[19]dm3/h[12]psi[5]
GPM[27]ft3/s[20]I/s[13]CFM[6]
76 PFC configuration
0b0000-0b0000…0b1111PFC status76.01
116 Parameter listing
EN
HI