52 Standard Commissioning Process
Note: If the error information like below, please new a folder named temp in drive C.
• Waiting nearly 25 seconds, programming successfully finished. Press any key to exit.
• Turn off the control power.
• Remove the XILINX platform cable USB II.
Loading the IO controller (AC500eco) software
• Save the following files and folders to the SD card (MC502) root folder. Files can be
found in the loading package (folder \04_IOController SW).
Note: Only MC502 SD card can be used. This is not the same SD card which is plugged
into the BCU.
• Switch off the control power.
• Install SD card adapter (MC503) into CPU PM55X.
• Inset SD memory card (MC502) into adapter MC503.
To Next Page
Loading...
