ABB ACS580MV Commissioning Manual

Standard Commissioning Process 85
• Save all the files in project folder and attach to the report.
• According to customer preferences, set the control panel language, parameter 96.01
Language.
• Save the parameter backup in ACS-AP-W/S panel. Option: Menu/Backups/Create
backup.
 SD card data backup
• Copy the Date from the SD memory card to PC.
Refer to Maintenance in ACS580MV Hardware Manual (2UBB004520), section
“Replacing the SD memory card”.
 Spare parts software version
Before leaving the site, the customer spare parts are to be checked against the bill of
material. If spare parts have not been ordered at all, the commissioning report is to be
marked accordingly.
Spare parts of the customer containing software (BCON, ACS-AP-W/S, CVMI2, IO
Controller, Control hub) are to be updated with the versions of the software and the
parameters used in the converter.
 Customer training
If not agreed by contract otherwise, the subjects listed below can be used as a guide when
organizing on-site training of operational staff. The training can be based on the Operation
of ACS580MV Hardware Manual (2UBB004520).

ABB ACS580MV Specifications

General

Category	DC Drives
Efficiency	Up to 98%
Output Voltage	0 V to Input Voltage
Control Method	Vector Control
Cooling Method	Air Cooling, Liquid Cooling
Protection Class	IP21, IP54
Communication Protocols	Modbus, Profibus, Ethernet/IP