Standard Commissioning Process 91
Note: If you have spare time while you are on-site, please take a moment to update the
part lists with the correct part locations in order to improve the quality of our data.
• All the drive data that is collected in 'Drive Data and Software' step should be added to
the table, including the firmware and software version of AC500eco, ACS-AP-S/W,
BCON, CVMI2 and Control hub.
• The parameter backup, parameter export and SD card data of BCON should be added
to the table also.
• Complete and upload all the information and data described in the steps.
To Next Page
Loading...
