Technical data 123
Vibration (IEC 60068-2) Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
max. 7 m/s
2
(23 ft/s
2
)
(13.2 to 100 Hz)
sinusoidal
Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
max. 7 m/s
2
(23 ft/s
2
)
(13.2 to 100 Hz)
sinusoidal
Max. 3.5 mm (0.14 in.)
(2 to 9 Hz),
max. 15 m/s
2
(49 ft/s
2
)
(9 to 200 Hz)
sinusoidal
Shock (IEC 60068-2-27) Not allowed
Max. 100 m/s
2
(330 ft./s
2
), 11 ms
Max. 100 m/s
2
(330 ft./s
2
), 11 ms
Free fall Not allowed 100 mm (4 in.) for
weight over 100 kg
(220 lb)
100 mm (4 in.) for
weight over 100 kg
(220 lb)
Materials
Drive enclosure • PC/ABS 2.5 mm, color NCS 1502-Y (RAL 9002 / PMS 420 C)
• hot-dip zinc coated steel sheet 1.5 to 2.5 mm, thickness of coating 100
micrometers, color NCS 1502-Y
Package Plywood and wood. Plastic covering of the package: PE-LD, bands PP or
steel.
Disposal The main parts of the drive can be recycled to preserve natural resources
and energy. Product parts and materials should be dismantled and
separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and
precious metals can be recycled as material. Plastics, rubber, cardboard
and other packaging material can be used in energy recovery. Printed
circuit boards and DC capacitors (C1-1 to C1-x) need selective treatment
according to IEC 62635 guidelines. To aid recycling, plastic parts are
marked with an appropriate identification code.
Contact your local ABB distributor for further information on
environmental aspects and recycling instructions for professional
recyclers. End of life treatment must follow international and local
regulations.
To Next Page
Loading...
