ABB ACS800-04M - Grounding of the Cable Shields

Electrical installation 67
Grounding of the cable shields
EMC sleeve *
Lead-through plate
Strip this
section *
Cable shield
Base plate
PE terminal of
the cabinet or
drive module
Strain relief
To power terminals
Example cable lead-through
Grommet
EMI conductive
Lead-through
Side view
cushion
plate
Strain
relief
* required for motor cables in first environment installations. First environment EMC
compliance is defined in Compliance with EN 61800-3:2004 (page 125).
Recommended
for control
cables