124 Technical data
Applicable standards
The drive complies with these standards:
• EN/IEC 60204-1:2018
Safety of machinery. Electrical equipment of machines. Part 1: General
requirements.
Provisions for compliance:
The final assembler of the
machine is responsible for installing
- an emergency-stop device
- a supply disconnecting device
- the ACS800-04/04M/U4 into a cabinet.
• EN 60529:1991
(IEC 529)
+ corrigendum May
1993
+ A1:2000
Degrees of protection provided by enclosures (IP code)
• IEC 60664-1:2007
Insulation coordination for equipment within low-voltage systems. Part 1:
Principles, requirements and tests.
• EN 61800-3:2004
Adjustable speed electrical power drive systems. Part 3: EMC
requirements and specific test methods
• EN 61800-5-1:2007
+A1:2017
Adjustable speed electrical power drive systems. Part 5-1: Safety
requirements – electrical, thermal and energy
• UL 508C (2002)
UL Standard for Safety, Power Conversion Equipment, second edition
• CSA C22.2 No. 274-17
Adjustable speed drives
To Next Page
Loading...
