About this manual
22
Inquiries
Address any inquiries about the product to the local ABB representative, quoting the
type code and serial number of the unit. If the local ABB representative cannot be
contacted, address inquiries to the manufacturing facility.
Route the cables. Planning the electrical installation: Routing the
cables
For compliance with the European Union EMC
Directive, see Technical data: CE marking
Check the insulation of the motor and the motor
cable.
Electrical installation: Checking the insulation of
the installation
Connect the power cables. Electrical installation
Connect the control and auxiliary control cables. Electrical installation, Motor control and I/O
board (RMIO), and the optional module manual
delivered with the module.
Check the installation. Installation checklist
Commission the drive. Operation, appropriate application program
firmware manual
Task See
To Next Page
Loading...
