Mechanical installation
31
Mechanical installation
Unpacking the unit
The drive is delivered in a box that also contains:
• plastic bag containing: screws (M3), clamps and cable lugs (2 mm
2
, M3) for
grounding the control cable screens
• residual voltage warning stickers
• hardware manual
• appropriate firmware manuals and guides
• optional module manuals
• delivery documents.
Delivery check
Check that there are no signs of damage. Before attempting installation and
operation, check the information on the type designation label of the drive to verify
that the unit is of the correct type. The label includes an IEC and NEMA rating, C-UL,
CSA and CE markings, a type code and a serial number, which allow individual
recognition of each unit. The first digit of the serial number refers to the
manufacturing plant. The next four digits refer to the unit’s manufacturing year and
week, respectively. The remaining digits complete the serial number so that there
are no two units with the same serial number.
To Next Page
Loading...
