The ACS800-11/U11
29
Type code
The type code contains information on the specifications and configuration of the
drive. The first digits from left express the basic configuration (e.g. ACS800-11-0030-
5). The optional selections are given thereafter, separated by plus signs (e.g.
+E202). The main selections are described below. Not all selections are available for
all types. For more information, refer to ACS800 Ordering Information (EN code:
64556568, available on request).
Selection Alternatives
Product series ACS800 product series
Type 11 regenerative, wall mounted. When no options are selected: IP 21, Control
Panel CDP312R, DDCS communication option module RDCO-03, no
EMC filter, Standard Application Program, cable connection box (cabling
from below), boards with coating, one set of manuals.
U11 wall mounted (USA). When no options are selected: UL type 1, Control
Panel CDP312R, DDCS communication option module RDCO-03, no
EMC filter, US version of the Standard Application Program (three-wire
start/stop as default setting), US gland/conduit plate, boards with coating,
one set of English manuals.
Size Refer to Technical data: IEC ratings.
Voltage range
(nominal rating in bold)
2 208/220/230/240 VAC
3 380/400/415 VAC
5 380/400/415/440/460/480/500 VAC
+ options
Filter E200 EMC/RFI filter for second environment TN (grounded) system,
unrestricted distribution. Note: Filter not needed for frame size R6.
E202 EMC/RFI filter for first environment TN (grounded) system, restricted
distribution (the A limits)
Cabling H358 US/UK gland/conduit plate
Control panel 0J400 no control panel
Fieldbus K... Refer to ACS800 Ordering Information (EN code: 64556568).
I/O L...
Application program N...
Manual language R...
To Next Page
Loading...
