ABB ACS880-11 - Page 259

Parameters 259
29.11 DC voltage ref1
source
Selects DC voltage reference source 1.
Two signal sources can be defined by this parameter and
29.12 DC voltage ref2 source. A digital source selected by
29.14 DC voltage ref1/2 selection can be used to switch
between the two sources, or a mathematical function (29.13
DC voltage ref1 function) applied to the two signals to create
the reference.
Zero
Zero None. 0
AI1 scaled 12.12 AI1 scaled value (see page 161). 1
AI2 scaled 12.22 AI2 scaled value (see page 162). 2
FB A ref1 03.05 FB A reference 1 (see page 122). 4
FB A ref2 03.06 FB A reference 2 (see page 122). 5
EFB ref1 03.09 EFB reference 1 (see page 122). 8
EFB ref2 03.10 EFB reference 2 (see page 122). 9
DDCS ctrl ref1 03.11 DDCS controller ref 1 (see page 122). 10
DDCS ctrl ref2 03.12 DDCS controller ref 2 (see page 122). 11
M/F reference 1 03.13 M/F or D2D ref1 (see page 122). 12
M/F reference 2 03.14 M/F or D2D ref2 (see page 122). 13
Motor
potentiometer
22.80 Motor potentiometer ref act (output of the motor
potentiometer).
15
PID 40.01
Process PID output actual (output of the process PID
controller).
16
Control panel (ref
saved)
Control panel reference, with initial value from last-used panel
reference. See section Using the control panel as an external
control source (page 21).
18
Control panel (ref
copied)
Control panel reference, with initial value from previous
source or actual value. See section Using the control panel as
an external control source (page 21).
19
Other Source selection (see Terms and abbreviations on page 114). -
29.12 DC voltage ref2
source
Selects DC voltage reference source 2.
For the selections, and a diagram of reference source
selection, see parameter 29.11 DC voltage ref1 source.
Zero
No. Name/Value Description Def/FbEq16
29.13
Ref1
29.14
1
0
MUL
SUB
ADD
MIN
MAX
29.02
0
AI
FB
…
Other
…
0
AI
FB
…
Other
…
29.12
29.11