Introduction to the manual
Contents of this chapter
This chapter gives basic information on the manual.
Applicability
The manual is applicable to the ACS880-204 IGBT supply modules for user-defined cabinet
installations.
Safety instructions
Follow all safety instructions delivered with the drive.
• Read the complete safety instructions before you install, commission, use or service
the drive. The complete safety instructions are given in ACS880 multidrive cabinets and
modules safety instructions (3AUA0000102301 [English]).
• Read the software-function-specific warnings and notes before changing the default
settings of a function. For each function, the warnings and notes are given in the section
describing the related user-adjustable parameters.
• Read the task-specific safety instructions before starting the task. See the section
describing the task.
Target audience
This manual is intended for people who plan the installation, install, start up and service the
drive, or create instructions for the end user of the drive concerning the installation and
maintenance of the drive.
Read the manual before working on the drive. You are expected to know the fundamentals
of electricity, wiring, electrical components and electrical schematic symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown.
1
Introduction to the manual 15
To Next Page
Loading...
