ABB ACS880-204 - Fuses; Fuses on BFPS Board; Fuses on CVAR Board; Fuses on BDFC Board

Frame
Basic module type
ACS880-104…
3)
IGBT supply unit type
ACS880-204-…
2)
Cabinet-installed type
ACS880-207-…
1)
2×R8iACS880-104-0410A-70720A-70720A-7
2×R8iACS880-104-0600A-71050A-71050A-7
3×R8iACS880-104-0600A-71570A-71570A-7
4×R8iACS880-104-0600A-72070A-72070A-7
6×R8iACS880-104-0600A-73080A-73080A-7
1)
Cabinet-installed units available from ABB
2)
IGBT supply unit types available from ABB as modules
3)
IGBT supply modules used. The quantity of the modules is shown in the Frame column.
Fuses
For fuse types, see the ordering information.
Note:
The recommended fuses are for branch circuit protection per NEC as required for the
UL/CSA approval.
Forced cooling is recommended for the AC fuses of the R8i supply modules to keep the
fuse temperature under 100 °C. Monitoring of cooling fan status or fuse temperature is also
recommended.
If the AC fuses are located in another cabinet (eg, ICU), the suitable fan unit for AC fuse
cooling depends on the cabinet design. It is recommended to install the fan in such a way
that it directly cools the fuses.
￭ Fuses on BFPS board
The fuse type is Mersen (Ferraz-Shawmut) A070GRB05T13 (5 A 690 V AC).
￭ Fuses on CVAR board
The fuse type is Mersen (Ferraz-Shawmut) A070GRB10T13/G330010 (10 A 700 V AC).
￭ Fuses on BDFC board
1 A, 400 V DC, 500 V AC.
Charging kit contents
￭ IEC
Charging contactorCharging fuses
Charging kit code
RatingTypeInfoRatingType
100 … 250 V AC/DC, 50/60 HzAF30-30-00-
13
HRC fuse
link
16 A, 690 V,
IEC 000
FAA000GG16
C14G16
3AXD50000002789
Cartridge
fuse
16 A, 690 V
50 A, 690 V
CH141DU
Fuse holder
100 … 250 V AC/DC, 50/60 HzAF96-30-22-
13
HRC fuse
link
35 A, 690 V,
IEC 000
OFAA000GG353AXD50000002845
276 Technical data