ABB ACS880-307LC - Type Designation Key of the Diode Supply Module

DescriptionCode
FCAN-01 CANopen adapter moduleK457
FSCA-01 RS-485 (Modbus/RTU) adapter moduleK458
FCNA-01 ControlNet™ adapter moduleK462
FECA-01 EtherCat adapter moduleK469
FEPL-02 EtherPOWERLINK adapter moduleK470
FENA-21 Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols,
2-port
K475
Ethernet switch for PC tool or control network (for max. 6 inverter units)K480
Ethernet switch with optical link for PC tool or control network (for max. 6 inverter units)K483
FEIP-21 Ethernet adapter module for EtherNet/IP™K490
FMBT-21 Ethernet adapter module for Modbus TCPK491
FPNO-21 Ethernet adapter module for PROFINET IOK492
FIO-11 analog I/O extension moduleL500
FIO-01 digital I/O extension moduleL501
FDCO-01 optical DDCS communication adapter moduleL503
FDCO-02 optical DDCS communication adapter moduleL508
RDCO-04 optical DDCS communication for BCU-xx (4xTransmitter/Receiver)L509
FAIO-01 analog I/O extension moduleL525
FDIO-01 digital I/O extension moduleL526
IEC 61131-3 application programmabilityN8010
Special color (RAL Classic)P913
Special color (other than RAL Classic)P966
Emergency stop (category 0) with safety relays, by opening the main breaker/contactorQ951
Emergency stop (category 1) with safety relays, by opening the main breaker/contactorQ952
Earth fault monitoring for IT (ungrounded) systemsQ954
Supply transformer breaker disconnect push button (red, wired to terminals) on the doorQ959
Emergency stop (category 0) with safety relays, by activating the Safe torque off functionQ963
Emergency stop (category 1) with safety relays, by activating the Safe torque off functionQ964
Emergency stop (configurable for category 0 or 1) with FSO-xx safety functions module, by activating
the Safe torque off function
Q979
Emergency stop button monitoringQ984
Documentation/manuals in EnglishR700
￭ Type designation key of the diode supply module
The type designation describes the composition of the module in short. The complete
designation code is divided in subcodes:
• The first 1…18 digits form the basic code. It describes the basic construction of the unit.
The fields in the basic code are separated by hyphens.
• The option codes follow the basic code. Each option code starts with an identifying letter
(common for the whole product series), followed by descriptive digits. The option codes
are separated by plus signs.
DescriptionCode
Basic codes
32 Operation principle and hardware description