ABB Advant AC500 - Mounting and Disassembling the Terminal Units and the I;O Modules; Assembly on DIN Rail

____________________________________________________________________________________________________________
V2 AC500 Hardware 1-14 System data AC500 / Issued: 05.2007
Mounting and disassembling the Terminal Units and the I/O modules
Assembly on DIN rail
Step 1: Mount DIN rail 7.5 mm or 15 mm
Step 2: Mount FBP Terminal Unit (TU505 or TU506)
Figure:
Assembly of the FBP Terminal Unit (TU505 or TU506)
The FBP Terminal Unit is put on the DIN rail above and then snapped-in below. The disassembly is
carried out in a reversed order.
Figure:
Disassembly of the FBP Terminal Unit (TU505 or TU506)