ABB Advant AC500 - Connection of Wires at the Spring Terminals

____________________________________________________________________________________________________________
V2 AC500 Hardware 1-27 System data AC500 / Issued: 05.2007
Connection of wires at the spring terminals
Connect the wire to the spring terminal
123
b
a
conductor driver
screw-
b
Screwdriver
for
Opening forOpening
closed
Terminal
open
Terminal
a
inserted
Screwdriver
Screwdriver
Spring
Figure: Connect the wire to the spring terminal (steps 1 to 3)
5674
Figure: Connect the wire to the spring terminal (steps 4 to 7)