____________________________________________________________________________________________________________
V2 AC500 Hardware 1-17 System data AC500 / Issued: 05.2007
The disassembly is carried out in a reversed order.
1
2
1
Figure:
Disassembly of the modules
Disassembly: Press obove and below, then remove the module.
Assembly with screws
If the Terminal Unit should be mounted with screws, a Wall Mounting Accessory TA526 must be inserted
at the rear side first. This plastic part prevents bending of the Terminal Unit while screwing on.
1
2
Front view
Rear view
Rear view
Holes for
wall mounting
31
Figure: Fastening with screws of the Terminal Unit TU516 (as an example)
1 The Wall Mounting Accessory TA526 is snapped on the rear side of the Terminal Unit like a DIN rail.
The arrow points to the right side.
2 Accessory for wall mounting inserted
3 Terminal Unit, fastened with screws
To Next Page
Loading...
