____________________________________________________________________________________________________________
V2 AC500 Hardware 1-21 System data AC500 / Issued: 05.2007
Switch-gear cabinet assembly
Basically, it is recommended to mount the modules on an earthed mounting plate, independent of the
mounting location.
DC532DC532DC505
DC532DC532PM581CM577CM572
DIN rail,
earthed
Mounting
plate,
earthed
DIN rail,
earted
Mounting
plate,
earthed
Cable duct
20 mm minimum distance between
the modules and the cable duct
Figure: Installation of AC500/S500 modules in a switch-gear cabinet
To Next Page
Loading...
