ABB AMA - Page 99

Manual for High Voltage Process Performance Motors
Commissioning Report - 85
3BFP 000 063 R0101 REV D
6 Machine protection settings
Overcurrent tripping: _______________A _________________ s
Instant overcurrent tripping: _______________A _________________ s
Overvoltage setting:
Earth fault setting:
Reverse power setting:
Differential protection setting:
Vibration monitoring:
Temperature monitoring:
- in stator winding
- in bearing
- in ______________________________
Other protection units:
no yes,
setting:
no yes,
setting:
no yes,
setting:
no yes,
setting:
no yes,
alarm:__________mm/s, trip:______________mm/s
no yes,
type:
no yes,
alarm:__________
ºC, trip:______________ºC
no yes,
alarm:__________
ºC, trip:______________ºC
no yes,
alarm:__________
ºC, trip:______________ºC