Section 5 Serial port configuration
5.1 Configuring serial ports
1. In the left pane, under Serial Port and I/O, click General Configuration.
2. Select an Application Mode for each serial port.
• Serial Gateway: Transparent connection to any serial device
• IEC-104: IEC-101 to IEC-104 conversion with IEC-101 serial device
protocol
• Modbus: Modbus conversion with Modbus/RTU or Modbus/ASCII serial
device protocol
5.2 Serial gateway
The serial gateway feature enables data from the serial port attached device to be
routed to Ethernet/mobile network (serial over IP) and vice versa. Serial gateway
processes the transmitted data transparently and does not alter it any way except for
buffering it for transmission. Because of the transparent communication, any
protocols can be used in actual communication between nodes.Serial gateway
configuration depends on used protocols.
1MRS758460 B Section 5
Serial port configuration
ARG600 Dual SIM Variant 21
User Manual
To Next Page
Loading...
