Section 7 Service configuration
7.1 Configuring services
1. In the left pane, click Services.
The service categories are listed under Services.
2. Click a service category.
3. Configure the service with the service parameters listed in the view.
4. Click Submit to save the settings.
7.2 Service parameters
Table 6: Common
Name
Description Value range
Common
Services
Use DNS
Proxy
Determines if the device acts as a DNS server for LAN devices. No, Yes
LLMNR
responder
The link-local multicast name resolution is a protocol that enables
Windows™ machines on LAN to find the device using its
hostname. This is currently supported in Windows™ Vista,
Windows™ Server 2008, Windows™ 7 and Windows™ 8.x. By
default, the device uses it's hostname (eg. arctic-02xxyy).
No, Yes
mDNS
responder
The multicast domain name system is a protocol that enables
Mac® OS X® machines on LAN to find the device using its
hostname (for example, arctic-02xxyy).
No, Yes
SSH Server The SSH (secure shell) is an encrypted network protocol for safe
remote command line connections. It is replacing the Telnet
protocol.
SSH Server Determines if logging into the device using SSH is allowed. The
device has internal SSH server, which allows incoming SSH
connections when enabled. By default, the SSH service is enabled
for LAN connections.
No, Yes
SSH protocol
version
Selects which SSH protocol versions are enabled in SSH Server.
It is recommended to allow only SSH protocol version 2 (SSH2) to
be used.
SSH1, SSH2
SSH public
keys
SSH Public keys can be added for remote logins with SSHkeys.
1MRS758460 B Section 7
Service configuration
ARG600 Dual SIM Variant 25
User Manual
To Next Page
Loading...
