Aztec 600 aluminium, ammonia, color, iron, manganese, phosphate
Single- and multi-stream colorimetric analyzers 13 Maintenance
IM/AZT6CR–EN Rev. J 65
c. Remove the 3 M4 screws C securing the valve
manifold to the analyzer, remove the valve manifold
and place on a clean work surface.
Fig. 13.1 Removing the Manifold
Note. During step 5, remove and refit the valves one at a
time in the order given to ensure they are refitted in the
correct position.
To Next Page
Loading...
