Aztec 600 aluminium, ammonia, color, iron, manganese, phosphate
Single- and multi-stream colorimetric analyzers Appendix D – Web Server
IM/AZT6CR–EN Rev. J 91
D.2 Operate
D.3 Monitor Status
D.4 Statistics
D.5 Logging Status
D.6 Operator Message
An 'Operator Message' is displayed on the chart view. For
example:
An entry is also included in the 'Alarm Event Log'.
An Instruction is displayed on the analyzer as a warning, for
example:
Operator instructions can be removed only by pressing the
key.
To send an operator message or instruction to the analyzer:
1. Type the 'User name' and 'Password'. Up to 160
characters can be used. These are the FTP username and
password that are set in the configuration – see
Appendix D, page 90.
2. Type either the message or an instruction (only one field
can be populated at any one time).
3. Click the button to send the message or instruction
to the analyzer.
Note. Menu options from the 'Operate' window start the
routine described when the associated button is selected.
To Next Page
Loading...
