ABB CMS-700 - Device components

CMS-700 SYSTEM CIRCUIT MONITORING SYSTEM (CMS)
9
—
Product overview
—
Reset button
There is a recessed button to restart the device or for resetting it to a defined as-delivered condition.
• Pressing the button for 3 to less than 6 seconds restarts the device with current settings
• Pressing the button for more than 10 seconds resets the device to the factory settings
Do not switch off the device during the reset process.
—
LEDs
Two LEDs indicate respectively the status of the device and the one of the network.
1. LED Status
Display Function
Off Device is off
Green on Device is ready
Green flashing slowly Firmware is ready, Web server is loading
Orange flashing slowly Firmware update ongoing
Orange on Booting
Red on Booting error
2. LED Network
Display Function
Off LAN is not connected
Green on LAN is connected
Green flashing Network traffic