Need help?Do you have a question about the ABB FDNA-01 and is the answer not in the manual?
General| ABB Type Designation | FDNA-01 |
|---|---|
| Manufacturer | ABB |
| Input Voltage | 24 VDC |
| Protection Class | IP20 |
| Ordering Number | 3BSE018160R1 |
| Category | Control Unit |
| Operating Temperature | 55 °C |
| Storage Temperature | -40°C to +70°C |
| Humidity | 95% RH (non-condensing) |
Provides essential safety instructions for installing the module into drives.
Provides an overview of the FDNA-01 module's function and capabilities.
Provides instructions on how to physically install the module into the drive.
Details on connecting the bus cable to the adapter module's terminal block.
General information on configuring the drive for operation with the adapter module.
Steps to activate DeviceNet communication between the drive and module.
Details on DeviceNet configuration parameters for Group A.
Details on DeviceNet configuration parameters for Group B.
Details on DeviceNet configuration parameters for Group C.
Step-by-step guide for initial start-up of ACS355 drives with the module.
Provides example drive parameter settings for ACS355 drives.
Step-by-step guide for initial start-up of ACSM1 drives with the module.
Provides example drive parameter settings for ACSM1 drives.
Step-by-step guide for initial start-up of ACS850/ACQ810 drives.
Provides example drive parameter settings for ACS850/ACQ810 drives.
Step-by-step guide for initial start-up of ACS880 drives with the module.
Provides example drive parameter settings for ACS880 drives.
How to prepare the master station for communication with the module.
Details of the ODVA AC/DC drive communication profile.
Details of the ABB Drives communication profile.
Explanation of control word and status word bits for drive control.
Detailed breakdown of the control word bits and their states/descriptions.
Explanation of the diagnostic LEDs (HOST, MODULE, NETWORK) on the module.
To Next Page
