EasyManua.ls Logo

ABB FDNA-01 - Instance #3: FDNA-01 Configuration Parameters Group C (Group 3)

ABB FDNA-01
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
152 Communication protocol
Instance #3: FDNA-01 configuration parameters
group C (group 3)
The actual parameter group number depends on the drive type.
Group C (group 3) corresponds to:
parameter group 54 in ACS355
parameter group 52 in ACSM1, ACS850 and ACQ810
parameter group 52 in ACS880 if the adapter is installed as
fieldbus adapter A or group 55 if the adapter is installed as
fieldbus adapter B.
3 Configuration Group B
(Group 2) – Parameter 3
Get, Set See 01 DATA OUT 1.UINT16
4 Configuration Group B
(Group 2) – Parameter 4
Get, Set See 01 DATA OUT 1.UINT16
5 Configuration Group B
(Group 2) – Parameter 5
Get, Set See 01 DATA OUT 1.UINT16
6 Configuration Group B
(Group 2) – Parameter 6
Get, Set See 01 DATA OUT 1.UINT16
7 Configuration Group B
(Group 2) – Parameter 7
Get, Set See 01 DATA OUT 1.UINT16
8 Configuration Group B
(Group 2) – Parameter 8
Get, Set See 01 DATA OUT 1.UINT16
9 Configuration Group B
(Group 2) – Parameter 9
Get, Set See 01 DATA OUT 1.UINT16
10 Configuration Group B
(Group 2) – Parameter
10
Get, Set See 01 DATA OUT 1.UINT16
# Attribute name Services Description Data
type
1 Configuration Group C
(Group 3) - Parameter 1
Get, Set
See 01 DATA IN 1.
UINT16
2 Configuration Group C
(Group 3) - Parameter 2
Get, Set
See 01 DATA IN 1.
UINT16
# Attribute name Services Description Data
type

Table of Contents

Other manuals for ABB FDNA-01

Related product manuals