—
WEB UI - Settings Menu
—
Settings Menu - Communication / SNMP
Version 3: To enable version 3 mark the v.3 checkbox, enter port number, password, user name, and
engine ID. The same as for versions v.1/2c port number must be 161 or greater than 1024. The password
for version 3 must have at least 8 signs, while the engine ID must have at least 12 characters in
hexadecimal format. To access data using SNMPv3 the authenticated and encrypted request must be
sent. The authentication is performed by username and password. For the authentication the MD5
protocol is used. Messages are additionally encrypted with the DES algorithm.
Please note that versions 1/2c and 3 can work simultaneously.
To Next Page
Loading...
