ABB ControlMaster CM50 - Logic equations; Analog inputs

ControlMaster CM10, CM30 and CM50
Universal process controllers,
1
/8,
1
/4 and
1
/2 DIN 10 Specification
110 IM/CM/S–EN Rev. R
Logic equations *
Custom linearizer *
Totalizer (CM30 and CM50 only) **
* Functionality level 'Standard' and above only
** Functionality level 'Extended' and above only
Analog inputs
Universal process inputs
Non-universal process inputs
Thermocouple types
B, E, J, K, L, N, R, S, T
Resistance thermometer
Pt100
*** Only if universal process input is configured as 'Thermocouple'
Number 8
Elements 15 Per equation
Operators OR, AND, NOR, NAND, NOT, EXOR
Number 2
Elements 20 Breakpoints
Number 2 (total) 9 digit totals
Type Analog, digital, frequency or pulse
Statistical
calculations
Average, maximum, minimum (for analog
signals)
Update rate 125 ms
CM10 1 standard
CM30 / CM50 2 (1 standard, 1 optional)
Type Voltage
Current
Resistance (ohms)
3-Wire RTD
Thermocouple
Digital volt-free
Digital 24 V
Frequency
Pulse
CM10 1 standard
CM30 / CM50 2 (1 standard, 1 optional)
Type Voltage
Current
Thermocouple ***
Digital volt-free
Digital 24 V