ABB DCS 600 MultiDrive - Page 59

Chapter 3 - Handling of Control Panel CDP 312
DCS 600 Operating Instructions IV F 3 - 13
The drive must be in stopped state during the DOWNLOAD proc-
ess, otherwise the following warning is displayed.
A+<8381
.<3@/3=<?88381

.9A869+.381
89>:9==3,6/
The drive that receives the downloaded parameters must have a
compatible software version to the drive from which the parameters
were uploaded. Otherwise the panel will display a warning:
A+<8381
.<3@/38-97:+>3,6/

.9A869+.381
89>:9==3,6/
Step Function Press key Display after key is
pressed
1. To enter the Function Mode
FUNC
6\ZW
?
:69+.&'&'
.9A869+.'('(
-98><+=>
2. To select a function.
6\ZW
?:69+.&'&'
.
9A869+.'('(
-98><+=>
3. To activate the selected func-
tion.
ENTER
6\ZW
'('('('('('('(
.9A869+.
4. Loading complete.
6\ZW
6/.:+8/
79>9<=:\ZW
-98@-?<+