ABB DCS 600 MultiDrive - Speed Reference Setting for the Drive

Chapter 3 - Handling of Control Panel CDP 312
IV F 3 - 18 DCS 600 Operating Instructions
3.15 Speed Reference Setting for the Drive
Step Function Press key Display after key is
pressed
1. Press one of these keys to get
the status row displayed.
ACT
PAR
FUNC
6\ZW33
6
/.:+8/
79>9<=:\ZW
-98@-?<+
2. To enter the Reference Setting
Mode
REF
6E\ZWG33
6
/.:+8/
79>9<=:\ZW
-98@-?<+
3. To change the reference:
(slow change)
(fast change)
6E\ZWG33
6
/.:+8/
79>9<=:\ZW
-98@-?<+
4. To exit the Reference Setting
Mode.
The selected Keypad Mode is
entered.
ACT
PAR
FUNC
DRIVE
6\ZW33
6
/.:+8/
79>9<=:\ZW
-98@-?<+