76
Exchange of SDCS-CON-4
3ADW000195R0501 DCS800 Service Manual e e
Press Soft key 2 (MENU),
Scroll with UP / DOWN buttons to menu item PAR BACKUP,
Confirm with Soft key 2 (ENTER),
Select UPLOAD TO PANEL and confirm with Soft key 2 (SEL), the upload
progress bar will be shown on the display,
Successful upload will be shown by message,
Confirm with Soft key 1 (OK),
Press Soft key 1 until back to the main menu (see picture above),
The actual parameter set is now stored in the DCS Control Panel.
DriveWindow
Light
Click File then Save As…
Click Save:
DriveWindow
Click File then Parameters and Save As…
To Next Page
Loading...
