ABB DCS880 Manual

8
Introduction to this manual
3ADW000803R0101 DCS880 H4T (Tosa) manual en a
Introduction to this manual
This manual contains all additional information needed for DCS880 units size H4T using the higher mains
voltage and DC voltage setup.
H4T
To increase the mains voltage and DC voltage of some DCS880 2-Q units size H4 the SDCS-PIN-H01 has
been substituted by an SDCS-POW-H01 together with an SDCS-PIN-H51 and an SDCS-PIN-H41.
This creates DCS880 2-Q units size H4T.
Application
H4T units are mainly used for non-motoric applications.
Related documents
A list of related manuals is shown on the inside of the front cover under DCS880 Drive Manuals.

ABB DCS880 Specifications

General

Control Type	Digital
Voltage Range	Up to 1200 V DC
Control Principle	Field-oriented control
Field Supply	Integrated
Communication Protocols	CANopen
Cooling	Air
Protection Class	IP00, IP20, IP21, IP54
Protection Features	Overvoltage, overtemperature, short circuit, earth fault
Rated Voltage	230 to 1200 V DC
Supply Voltage	380 ... 690 V AC
Input Voltage Range	230 to 690 V AC
Control Mode	Speed, Torque