ABB DCS880 Manual

11
Introduction to this manual
3ADW000803R0101 DCS880 H4T (Tosa) manual en a
Cybersecurity disclaimer
This product is designed to be connected to and to communicate information and data via a network
interface. It is the customer's sole responsibility to provide and continuously ensure a secure connection
between the product and the customer network or any other network (as the case may be). The
customer shall establish and maintain any appropriate measures (such as but not limited to the
installation of firewalls, application of authentication measures, encryption of data, installation of anti-
virus programs, etc.) to protect the product, the network, its system and the interface against any kind
of security breaches, unauthorized access, interference, intrusion, leakage and/or theft of data or
information. ABB and its affiliates are not liable for damages and/or losses related to such security
breaches, any unauthorized access, interference, intrusion, leakage and/or theft of data or information.

ABB DCS880 Specifications

General

Control Type	Digital
Voltage Range	Up to 1200 V DC
Control Principle	Field-oriented control
Field Supply	Integrated
Communication Protocols	CANopen
Cooling	Air
Protection Class	IP00, IP20, IP21, IP54
Protection Features	Overvoltage, overtemperature, short circuit, earth fault
Rated Voltage	230 to 1200 V DC
Supply Voltage	380 ... 690 V AC
Input Voltage Range	230 to 690 V AC
Control Mode	Speed, Torque