ABB DCS880 Manual

9
Introduction to this manual
3ADW000803R0101 DCS880 H4T (Tosa) manual en a
Terms and abbreviations
Term/Abbreviation
Definition
AC 800M
Type of programmable controller manufactured by ABB.
ACS-AP-I
Types of control panel used with DCS880 drives and DCT880 units.
ACS-AP-W
Adaptive Program
(AP)
Adaptive Program of the drive/unit. See Adaptive programming, Application
guide (3AXD50000028574)
AI
Analog input; interface for analog input signals.
AO
Analog output; interface for analog output signals.
Application program
Program written by the Automation Builder. See Drive (IEC61131-3) application
programming manual (3AUA0000127808).
Automation Builder
Tool to write application programs. See Drive (IEC61131-3) application
programming manual (3AUA0000127808).
Control unit Contains the electronics and I/O connections of the drive/unit. The control unit is
connected to the power unit.
D2D
Drive-to-Drive or Device-to-Device; communication link between drives/units.
DCS880
A product family of ABB drives.
DCSLink
Communication between the armature converter and the field exciters or 12-pulse
communication.
DDCS
Distributed drives communication system. A protocol used in communication
between ABB equipment.
DI
Digital input; interface for digital input signals.
DIO
Digital input/output; interface that can be used as a digital input or output.
DO
Digital output; interface for digital output signals.
Drive
Converter to control DC motors/loads.
DriveBus A communication link used by, for example, ABB controllers. DCS880 drives/units
can be connected to the DriveBus link of the controller.
DriveAP
Adaptive Programming of the drive/unit. See Adaptive programming, Application
guide (3AXD50000028574).
Drive Composer
PC tool for commissioning and maintenance of ABB drives/units.
EFB
Embedded fieldbus.
FAIO-01
Optional analog I/O extension module.
FBA
Fieldbus adapter.
FCAN-01
Optional CANopen adapter.
FCNA-01
Optional ControlNet adapter.
FDCO-0x
Optional DDCS communication module.
FDIO-01
Optional digital I/O extension module.
FDNA-01
Optional DeviceNet adapter.
FEA-03
Optional I/O extension module.
FECA-01
Optional EtherCAT® adapter.
FEN-01
Optional TTL encoder interface module.
FEN-11
Optional absolute encoder interface module.
FEN-21
Optional resolver interface module.
FEN-31
Optional HTL encoder interface module.
FENA-11
Optional Ethernet/IP, Modbus/TCP and PROFINET IO adapter.

ABB DCS880 Specifications

General

Control Type	Digital
Voltage Range	Up to 1200 V DC
Control Principle	Field-oriented control
Field Supply	Integrated
Communication Protocols	CANopen
Cooling	Air
Protection Class	IP00, IP20, IP21, IP54
Protection Features	Overvoltage, overtemperature, short circuit, earth fault
Rated Voltage	230 to 1200 V DC
Supply Voltage	380 ... 690 V AC
Input Voltage Range	230 to 690 V AC
Control Mode	Speed, Torque