Modifications reserved
9.3 Communication interfaces
Customer interfaces : outputs
Dry port X 2
Five voltage-free contacts
For remote signaling and automatic computer shutdown
Customer interfaces: inputs
Dry port X1
1x remote shutdown [EMERGENCY OFF (normally
closed)]
2x programmable customer’s inputs
(1
st
default as GEN-ON (normally open)
(2
nd
free programmable customer’s inputs (normally
open)
1x temp. sensor for battery control
1x 12 VDC output (max. )
Serial ports RS232 on Sub-D9
1x system frame
For monitoring and integration in network management
USB
1x for monitoring and software management
Network interface card (optional)
SNMP interface, Modbus TCP, Modbus RS-485
To Next Page
Loading...
