ABB EasyLine EL3020 Datasheet

28 EasyLine EL3000 Series Data Sheet 10/24-4.10 EN Rev. 9
Certifications
CE conformity
The EL3000 series gas analyzers satisfy the requirements of the
following European directives:
2006/95/EC Low voltage directive
2004/108/EC EMC directive
94/9/EC ATEX directive
Compliance with the requirements of directive 2006/95/EC is
evidenced by full compliance with European standard:
EN 61010-1:2001
Compliance with the requirements of directive 2004/108/EC is
evidenced by full compliance with European standards:
EN 61326-1:2006, EN 61000-3-2 : 2006 and EN 61000-3-3 : 1995
+ A1:2001 + A2 : 2005
Compliance of the version in category 3G for measurement of
non-flammable gases and vapors with the requirements of
directive 94/9/EC is evidenced by full compliance with European
standard:
EN 60079-15 :2005
Performance test
The EL3000 series gas analyzers
• Uras26 (sample components CO, NO, SO
2
, CO
2
, N
2
O),
• Magnos206 (sample component O
2
) and
• Electrochemical oxygen sensor (sample component O
2
)
are certified according to the approval criteria of EN 15267 for
use in facilities requiring authorization according to European
directive 2001/80/EG and meet the requirements of the 27
th
/30
th
BImSchV (Federal Immissions Control Ordinance) and TA-Luft
(Technical Instructions on Air Quality) regulations. The require-
ments based on QAL1 according to EN 14181 and EN ISO 14956
are fulfilled.
Report No. 691317 of June 30, 2006. Publication: Federal
Gazette of October 14, 2006, No. 194, page 6715
Report No. 1243485a of February 14, 2009. Publication: Federal
Gazette of August 25, 2009, No. 125, page 2936
Approval for USA and Canada – CSA
The EL3000 series gas analyzers are certified for use in general
purpose environment, evidenced by full compliance with
standards CAN/ CSA-C22.2 No. 61010-1-04 and UL Std.
No. 61010-1 (2
nd
Edition).
Certificate No. 1714030
Approval for Russian Federation – GOST-R
The EL3000 series gas analyzers are certified for use in general
purpose environment. The following documents are available:
GOST-R certificate No. POCC DE.HO03.B03490,
Rostekhnadzor operation permission No. PPC 00-39671,
Pattern approval certificate No. DE.C.31.004.A No. 37984.
Approval for China – NEPSI
The gas analyzer model EL3040 with Uras26, Limas23,
Magnos206 and Caldos27 is certified for use in hazardous loca-
tions. The gas analyzer may be used for measurement of non-
flammable gases and vapors. It is marked with Ex nAC II CT4.
Certificate No. GYJ101401X

ABB EasyLine EL3020 Specifications

General

Brand	ABB
Model	EasyLine EL3020
Category	Measuring Instruments
Language	English