ABB EL3000 Series - Preparation for Installation; Scope of Supply and Delivery

EL3000 CONTINUOUS GAS ANALYZERS | CI/EL3000-EN REV. B 13
Preparation for installation
Scope of supply and delivery
Scope of supply and delivery
 Gas analyzer model EL3020 (19-inch housing) or model EL3040
(wall-mount housing)
 Screwed fittings with tubing connectors for the connection of flexible
tubes
 Mains lead (see page 102), length 5 m
 Mating plugs (socket housing) for the electrical connection of the
I/O modules (attached to the terminals of the I/O modules)
 Screwdriver (required for attaching the electric lines in the mating plugs)
 Micro-porous filter (see page 82) (pre-assembled)
 DVD-ROM "Software tools and technical documentation"
 Commissioning instruction
 Analyzer data sheet
Fidas24:
 Mains lead (see page 103), length 5 m, with 4-pin socket connector and
separate grounding connector for the power supply to the heating of
the detector and the heated sample gas connection
 Accessories pack with fittings and O-rings for connection of the sample
gas line
 Exhaust pipe with fitting nut and compression fitting