22 EL3000 CONTINUOUS GAS ANALYZERS | CI/EL3000-EN REV. B
Dew point
The dew point of the test gases must be approximately the same as the dew
point of the sample gas.
NOTE
The notes for calibrating must be considered.
Pressure sensor
The pressure sensor is installed in the gas analyzer ex works. It is located
downstream the sample cell.
Gas connections
see sections
"Gas connections Limas23 (Model EL3020)" (see page 63) and
"Gas connections Limas23 (Model EL3040)" (see page 64)
To Next Page
Loading...
