56 EL3000 CONTINUOUS GAS ANALYZERS | CI/EL3000-EN REV. B
Uras26: Gas connections for pipelines
(internal gas lines executed as stainless steel pipes)
6
Pressure sensor
Design: Screwed fitting with hose nozzle (stainless steel 1.4305/SAE 303) for hose with 4 mm inner di-
ameter (supplied)
11
Sample gas inlet
12
Sample gas outlet with one sample cell
13
Sample gas outlet with two sample cells in series
Design: ⅛ NPT female thread (stainless steel 1.4305/SAE 303) for threaded connections (not supplied)
Note: The oxygen sensor, the option "Integrated gas feed" and the version with separate gas feed
paths are not possible.
Magnos28: Gas connections
1
Sample gas inlet
2
Sample gas outlet
Design: ⅛ NPT female thread (stainless steel 1.4305/SAE 303)
Connection of flexible tubes: straight screwed fittings (PP) with nozzles for flexible tubes with
inside diameter = 4 mm (supplied)
Connection of pipelines: Threaded connections (not supplied)
Note: The sample gas outlet gas feed path 1 of the Uras26 is connected ex works to the sample gas
inlet of the Magnos28.
To Next Page
Loading...
