Installation and maintenance guide
Emax 2 Retrofill Circuit Breakers
Direct/CiC Replacement of Legacy GE
AK 600A - 4000A Circuit Breakers Used in
AKD-5 & Substructures
- General Electric AKD-5 Low Voltage Switchgear is a free-standing assembly of metal-
enclosed ANSI power circuit breakers. It may be a part of a single-ended or double-
ended load center unit substation.
- It uses AK/AKJ/AKJT/AKS/AKST Breaker.
- This manual applies to both Emax 2 Retrofill breakers for AKD-5 switchgear and OEM
substructures
Emax 2 Retrofill Circuit Breakers
Installation and maintenance guide
To Next Page
