2TSA451011P0000 Rev-B © 2020 Emax 2 Retrofill Circuit Breakers 600A-4000A | 3
Preface
1 - Hazards
Overview The following important highlighted information appears throughout this document to
warn of potential hazards or to call attention to information that clarifies a procedure.
Carefully read all instructions and become familiar with the devices before trying to install,
operate, service, or maintain this equipment.
Danger
Table 1
This indicates a hazardous situation which, if not avoided, results in death or serious injury.
A variety of electrical hazards warnings are displayed here & are applied to installation
manuals. These are standard or generic alerts & labels that must be taken quite seriously
when installing Retrofill circuit breakers in AKD & other OEM’s switchgear and when working
with potentially dangerous electrical equipment (Table 1).
Generic Danger Alerts
Warning
Table 2
This indicates a hazardous situation, which, if not avoided, would result in death or serious
injury. A variety of electrical hazards warnings are displayed here and are applied to
installation manuals. These are standard or generic alerts and labels that must be taken
quite seriously when installing Retrofill circuit breakers in AKD & other OEMs switchgear and
when working equipment that can cause injury, but may not be necessarily fatal (Table 2)
Generic Warning Alerts
To Next Page
Loading...
Need help?
General
