ABB Endura AZ series - AC Power Supply Connections

Endura AZ series integral and remote transmitter
Combustion oxygen monitor 4 Electrical Installation
12 IM/AZ20E–EN Rev. F
4.1.1 AC Power Supply Connections
Note. Tighten power supply terminal screws to a torque of 0.8 Nm (7 lbf.in).
Fig. 4.1 AC Power Supply Connections
L
N
123
Warning. Use fuse rated 1.6 A Type F only
Fuse
Line
Neutral
100 to 240 V AC (±10 %)
50 / 60 Hz