ABB Endura AZ series - 5 Programming; Navigating Menus and Parameters

Endura AZ series integral and remote transmitter
Combustion oxygen monitor 5 Programming
26 IM/AZ20E–EN Rev. F
5 Programming
5.1 Navigating Menus and Parameters
The four keys below the display are used to navigate the menus and execute all system commands and
selections.
Fig. 5.1 Display and Keys
Item Description
A Screen title at the current level / parameter
B Menu level title
C Menu level icon
D Prompt executed by pressing the key
E Prompt executed by pressing the key
F Left key – used for parameter navigation (back to previous screen)
G Up / Down keys – used to scroll through menu options and to increase / decrease values in editable
parameters
H Right key – used to navigate to sub-levels and to accept / select parameter values / selections
Table 5.1 Display Features and Key Functions
Exit Select
Menu
Easy Setup
A
E
D
B
C
F
G
H