ABB Endura AZ series - Easy Setup

Endura AZ series integral and remote transmitter
Combustion oxygen monitor 5 Programming
IM/AZ20E–EN Rev. F 33
5.4.1 Easy Setup
The Easy Setup menu contains a series of easy setup options
for users with Advanced level access.
Standard and Read Only level users cannot access the Easy
Setup menu.
Parameter Comment / [Range] Default
Language Selects the language displayed on the transmitter's local
display – see Section 5.4.5, page 48 for language options.
English
Instrument Tag Used to enter an instrument tag (up to 20 characters)
displayed on the Operator Page(s) – see Section 5.4.5,
page 48.
Characters are selected from an alphanumeric list – see
Section 5.1, page 26 for navigation details.
The tag is not displayed on the Operator Page(s) if a
Display Mode of 3 x 9 is selected – see Section 5.4.5, page
48.
N / A
Date Format Selects the format of the displayed date.
DD-MM-YYYY
MM-DD-YYYY
YYYY-MM-DD YYYY-MM-DD
Time & Date Sets the current local time and date. N / A
Hr:Min:Sec
Year:Month:Day
Probe Type Selects the probe type to be used with the transmitter.
AZ20 &
Remote Tx*
AZ20 & Integral Tx
AZ20 & Remote Tx
AZ25 & Remote Tx
AZ30 & Integral Tx
AZ30 & Remote Tx
AZ35 & Remote Tx
AZ10 With Filter
AZ10 No Filter
*For marine application Exhaust Gas Recirculation (EGR) transmitters, the probe type is set to AZ10 No
Filter and cannot be changed.
Table 5.6 Easy Setup Menu
1
Menu
Exit
Select
Easy Setup