Endura AZ series integral and remote transmitter
Combustion oxygen monitor 5 Programming
62 IM/AZ20E–EN Rev. F
…Communication
Cyclic Output For diagnostic purposes, it is possible to configure the
device (transmitter) to send out data values via the IrDA
interface on the front of the transmitter – these can be
viewed via hyperterminal.
Interval Selects the time interval between each set of data to be
sent out via IrDA.
Off Off
1, 10, 30 s
1, 10, 30, 60 m
Assignment Selects which signals are to be transmitted.
[Assigned / Not Assigned]
Not
Assigned
(all
parameters)
Oxygen
Cell Temperature
Cell Temp. Rate
Cell mV
Output
CJ Temperature
Cal. Details
Performance
Details
Mains Supply
Details
Internal
Temperature
Parameter Comment / [Range] Default
Table 5.13 Communication Menu (Continued)
To Next Page
Loading...
