106
000039BG-F
8 - Maintenance
Storage and dismantling
Storage of the equipment or long period of non-use
If the equipment is not being currently used or is to be stored for a long
period of time, check that it is correctly packed and contact FIMER for
storage instructions.
The equipment must be stored in well-ventilated indoor areas and in an
enviroment that doesn’t damage the components of the equipment.
Restarting after a long period of non-use requires the equipment be in-
spected and, in some cases, the removal of oxidation and dust will be
required that has settled inside the equipment.
Dismantling, decommissioning and disposal
FIMER CANNOT be held responsible for disposal of the equipment (displays, cables, batte-
ries, accumulators, etc.). The customer must dispose of these substances, which are poten-
tially harmful to the environment, in accordance with the regulations in force in the country of
installation.
If the equipment is dismantled, in order to dispose of the products that it
is composed of, you must adhere to the regulations in force in the country
of destination to avoid a hazardous disposal situation.
Dispose of the various types of materials that are part of the equipment at facilities that are
suitable for the purpose.
Table: disposal of components
COMPONENT CONSTRUCTION MATERIAL
Frame, brackets, supports ............................................................................................... Arc-welded steel FE37
Casing or covers ................................................................................................................................ABS, plastic
Paint and ........................................................................................................................................................ RAL
Gaskets and seals ............................................................................................................ Rubber / Teon / Viton
Electrical cables ......................................................................................................................... Copper / Rubber
Conduits .............................................................................................................................. Polyethylene / Nylon
Back-up battery ................................................................................................................. Nickel / Lead/ Lithium
To Next Page
Loading...
