ABB Fimer PVI-10.0/12.5-TL-OUTD - Page 17

17
000430CG-F
2 - Characteristics
Table: Technical Data
PVI-10.0-TL-OUTD PVI-12.5-TL-OUTD
Output
AC Connection to the grid Three phase 3W or 4W+PE
Nominal AC output voltage (Vacr) 400 V
Output voltage range (Vacmin...Vacmin) 320...480 V
(1)
Nominal AC Output Power (Pacr @cosφ=1) 10000 W 12500 W
Maximum AC Output Power (Pacmax @cosφ=1) 11000 W
(3)
13800 W
(4)
Maximum apparent Output power (Smax) 11500 VA 13800 VA
Maximum output current (Iacmax) 16.6 A 20.0 A
Contribution to short-circuit current 19.0 A 22.0 A
Inrush current Negligible
Maximum fault current <25 A rms (100ms)
Rated Output Frequency (fr) 50 Hz / 60 Hz
Output Frequency Range (fmin...fmax) 47...53 Hz / 57…63 Hz
(2)
Nominal Power Factor
> 0.995 (adj. ± 0.9
with Pacr =10.0 kW
± 0.8 with max 11.5kVA)
> 0.995 (adj. ± 0.9
with Pacr =12.5 kW
± 0.8 with max 13.8kVA)
Total Current Harmonic Distortion < 2%
AC Connections Type Screw Terminal block (max cross-section 16 mm²); cable gland M40
Output protection
Anti-islanding Protection Complying with the local standard
Maximum AC Overcurrent external protection 25.0 A
Output overvoltage protection - Varistors 4, plus gas arrester
Operating performance
Maximum Efciency (ηmax) 97.8%
Weighted Efciency (EURO/CEC) 97.1% / - 97.2% / -
Power Supply Threshold 30.0 W
Night-Time Consumption < 1.0 W
Communication
Wired Local Monitoring (opt.) PVI-USB-RS232_485 (opz.)
Remote Monitoring (opt.)
VSN300 Wi Logger Card (opz.), PVI-AEC-EVO (opz.),
VSN700 Data Logger (opz.)
Wireless Local Monitoring (opt.) VSN300 Wi Logger Card (opz.)
User Interface LCD Display with 16 characters x 2 line