ATEX markings
The markings on the module show the ATEX classification of the
FPTC-02 module.
Specific marking of explosion protection1
Equipment group II: Product for surface industry (other than mining ap-
plications)
2
Equipment category 2. Parentheses show that the module must be in-
stalled outside the potentially explosive atmosphere.
3
Certified for use in explosive atmospheres caused by:4
G = gases, vapors or mists, D = dust.
￭ Drive
Option +Q971
When the FPTC-02 module is ordered as a factory-installed option,
an additional sticker is sometimes attached to the drive/module to
signify ATEX classification of the drive Safe disconnection function
(+Q971) of the drive/module. This sticker and the ATEX certification
reference are not mandatory with the FPTC-02 module.
Hardware description 25
To Next Page
Loading...
