In the factory-installed options, this sticker is already attached to the
drive/inverter module at the factory.
In the cabinet-built drives, this sticker is attached to the cabinet door
at the factory.
CE marking with Notified Body identification: The manufacturer declares
that the product conforms with ATEX Product Directive 2014/34/EU.
1
Notified Body: Eurofins Expert Services (Formerly VTT Expert Services,
now part of the Eurofins Group).
Specific marking of explosion protection2
Equipment group II: Product for surface industry (other than mining ap-
plications)
3
Equipment category 2. Parentheses show that the drive (or inverter unit)
must be installed outside the potentially explosive atmosphere.
4
Certified for use in explosive atmospheres caused by:5
G = gases, vapors or mists, D = dust.
Certificate reference6
Hardware description 27
To Next Page
Loading...
